5 Top Labour-Saving Products

Posted on 14/12/17

DID YOU KERNOW, YOU CAN REDUCE INSTALLATION TIMES BY UP TO 70%? . . . 
...USING OUR LABOUR-SAVING PRODUCTS.

It’s easy to use the same products every day, why look at anything else? Perhaps you just don’t have time to consider the alternatives, or 'if it ain't broke, don't fix it'. But what if other solutions saved you a substantial amount of installation time? And time is money, right? Although we supply many labour-saving products to the building services industry, here’s a short list of five top products that can save you significant time and money.

1) siFRAMO MODULAR SUPPORTS

siFRAMO is an amazing steel support solution that saves the huge costs of heavy welded steel fabrications. It’s the first real alternative to welding and is very quick, simple and easy to assemble. FRAMO -Steel Support SolutionsSiFRAMO is a laser welded box section that replaces secondary steelwork on-site. It’s a reliable solution that’s guaranteed to save you time and reduce costs. Here’s why.  

  • Off-the shelf, very quick delivery
  • Accelerated installation process. Why weld when you can bolt?
  • No more welding, galvanising and transport costs
  • No skilled staff, special tools or equipment needed
  • Incredibly versatile. Easily adjusted and modified during installation
  • Uniform quality standard
  • Aesthetically pleasing
  • Project support

Can be used to support a wide range of applications covering rooftop and plant access, electrical, plant room and energy centres and modular carcass construction.

2) CADDY ROD-LOCK RANGE

An innovative solution to install electrical and mechanical systems supported by threaded rod. For use with concrete and solid brick, the Caddy Rod-Lock simplifies installation by removing the awkward twisting of threaded rod. The prefabricated assemblies easily lift and lock into place, helping to save a great deal of time and money. It even works with slightly damaged threads and minor burrs on the threaded rod.

  • Reduces installation time by up to 60%
  • Extensive time-savings when used with pre-fabricated brackets
  • Just push-fit, no need to twist
  • High load capacity
  • No special installation tools required

 The video shows just how easy Caddy Rod-Lock is to install versus traditional methods.



3) ZIP CLIP STRUT-LOCK

 ZIP CLIP have just introduced an inventive new suspension fastening system, STRUT-LOCK, engineered to be time-saving as well as safe and secure. STRUT-LOCK is essentially a safe lockable solution for installing single and multi-tiered arrangements of cable management and HVAC applications. STRUT-LOCK

 Zip Clip’s new system is versatile, allowing for use with channel nut or nut and washer, and delivers extremely well on safety. However STRUT-LOCK’s clever design means you can really benefit from easy installation, reduced hassle and subsequently, serious time savings.

  • Compatible with standard channel
  • Secure lock-off collar with ‘mm’ adjustment
  • Easily fit multi-layer trapeze brackets
  • Various lengths and multiple anchor fixings available
  • Impressive load capacity of 45kg per wire (5.1 SF)

 See our feature page to learn more about STRUT-LOCK, including the installation video.


4) TCS41 BEAM CLAMP

The TCS41 is a flexible beam clamp with a difference. Its unique base fits into the slot on the back of the strut channel and allows for the strut channel to be connected to the beam clamp without obstruction. Beam Clamp TCS 41This simple solution prevents time consuming difficulties, reduces installation time by up to 60% and provides you with labour-savings.

  • Clever flange clamp connects to either side of channel
  • Install channel with no obstruction on open side
  • Allow full open side of channel to be used
  • Cut down channel wastage
  • Quick and easy to install

 The TCS41 comes completely pre-assembled with clamping bolt and locking nut.

5) PRE-CUT STUD LENGTHS

 Using pre-cut stud lengths to the exact length you require on-site, can save you huge costs and ultimately increase your profitability.Pre-Cut Studs

  • Why cut studding on site when you can buy the length you require?
  • Available off-the-shelf for fast delivery
  • No more deburring or struggling with damaged stud-ends
  • Avoid hot-works on site and risks of cutting
  • Eliminate wastage from cutting down studding lengths

 At Kernow we stock and supply a large range of pre-cut studding in different lengths and finishes, so we’re sure to be able to provide what you need. For more detail on available sizes, visit our Cut Studs page.  


Now you're aware of these great products and their benefits, you don't need to waste any more time or money! Get in touch if you think any of the above could benefit you, or if you're interested in any other labour-saving products. 
 

Back