3m Zip Clip Thread-It' S M8x25 Suspension System 50kg SWL

The system consists of a wire and a Zip-Clip with a choice of M6 or M8 threaded termination.

The Specifics

The range consists of a pre-determined length of wire from 1 metre to 10 metres with a choice of Safe Working Load:
- G 15kg
- S 50kg
- Y 90kg

The Applications

Link male thread to female threaded fixings to attach wire support to a number of different ceiling types:
- Concrete ceilings
- Profile channel
- Profile channel nuts
- Eyebolt assemblies 
- Rib deck ceilings
- Lindapter rib deck wedges
- Cable management
- Ducting

The Technical Information

- Key free release system
- Comes with M6 or M8 eyebolt as standard
- Other eyebolts available on request
- Suspension can be inverted
- High tensile galvanised wire 1960N/mm2 grade 7 x 7 construction
- BSEN 12385 standard & Safety factor 5:1

The Installation

- For use in concrete, ensure that the drop in anchor is correctly fixed then thread the M6/M8 stud into place:

 • Install drop in anchor to manufacturer’s instructions
 • Ensure correct setting tool is used

- Pass the wire through the Zip-Clip in the direction of the arrow
- Pass through or around your required suspension and back through the Zip-Clip  leaving 15cm of wire protruding
- The stud can be used in reverse configuration and threaded into the product to be suspended
- Always confirm engagement of the Zip-Clip on the wire by pushing the pin in the opposite direction to the arrows indicated